I bought a cookie press sometime last year, foreseeing some cookie-making for cookie swap come Christmas...but in the busy-ness of the Holidays, I did not actually get to practice with my new gadget until after Christmas.
The motivation I had to get myself a cookie press was when hubby previously commented on lengua de gato that made me recall this neat gadget which my Nanay used to have (although I never actually saw her use it).
I got one that I realized now is too pricey, it seems, as I perused amazon.com for the same item. (Probably, amazon did not have the $14.99 at the time I purchased mine). But I guess, with this price and the good reviews as to how sturdy it is, I think I made a good choice nevertheless. Just out of curiosity, I got myself this $14.99 to see if it is the same sturdy construction. Then I will update you readers who might be interested to get it.
My first cookies were overbaked, tough, and brown. I let hubby try one and he suggested I bake them for a shorter time. He then liked the ones baked only up to the point that edges start to turn brown. I also had to get used to pumping out the dough, and to try not greasing the baking sheet. Probably oven temps and environmental conditions and baking pan differences accounted for my initial results despite following the recipe in the manual. After I adjusted the baking time and omitted greasing the baking sheets (I used insulated nonstick aluminum), my hubby now has a new favorite homemade cookie. He can finish a whole batch in two days. (Sadly, my kids and I are not that crazy over this; we like the lengua de gato better.)
This is the first recipe I will post for cookie press.
Basic dough recipe:
500 g (~ 1 lb) flour
250 g (~1/2 lb) sugar
250 g (~ 1/2 lb or 2 sticks) butter
pinch of salt
2-3 oz milk
3 egg yolks
Instructions:
Preheat the oven to 350 deg F and place the rack at the middle.
Melt the butter in the microwave for about a minute and stir; set aside in room temp. Place the flour into a bowl mixing it with the sugar and a pinch of salt. Pour the egg yolks in the center and mix the dough with a fork. Add the butter previously melted, then the milk, and knead with your hands until completely uniform and soft.
Coming up is another recipe that I and the kids preferred, but my husband likes ok (he still prefers the more dense recipe above).
"Kusina" = kitchen; "Manang" (aka Ate in Tagalog)= Ilokano term for older sister.
A Filipina's adaptation in an American Kitchen
Showing posts with label tools and gadget. Show all posts
Showing posts with label tools and gadget. Show all posts
Saturday, January 16, 2010
Thursday, January 14, 2010
How to Use the Cookie Press
I bought a cookie press last December, triggered by a my husband's comment in relation to lengua de gato. Somehow, the image of my Nanay's plastic cookie press flashed in my mind, and I knew I had to get myself this toy.
At the time I got mine, it was the $41, chosen because of some good reviews on amazon. Then as of typing this, I saw the $14.39. I was intrigued by the cheap price. The gadget itself seemed the same. So I decided to order this just to see if it was made of the same material, and if constructed the same. Will update this post once I got a hold of the cheaper one.
I never saw my mother use hers. So I looked at some videos on how to use the cookie press. Got some ideas from Wilton's.
I used the ONLY recipe (coming up next) that came with the gadget, and while it said to grease the baking sheet, I found out that if I don't, the dough stays on the sheet after coming out of the press. If I did grease the baking sheet, the dough just would not stay on it. The Wilton video I saw suggested ungreased sheet anyway. I also had to shorten the baking time, and I placed the rack at the middle of the oven to not burn the cookies. After I developed the rhythm of pressing and baking, my husband is now a happy cookie muncher.
The baking pan I used is a nonstick insulated aluminum pan as pictured below in the link from amazon.
How to use the cookie press:
Unscrew the closing ring and raise the piston. Fill the entire cylinder with part of the dough prepared. Insert the desired die-plate into the closing ring.
The raised part of the die-plate must be facing downwards. Screw the closing ring onto the cylinder. Grrease a cookie sheet evenly. Choose the size of the biscuits you wish to obtain by rotating the regulator (1=small biscuits; 2=large biscuits).
Turn the knob so that the jack on the lever meets the notches on the rod. Pump the lever a few times until the dough comes out of the holes of the die-plate evenly. Remove this first dough so that the die-plate stays clean.Place the machine on the cold cookie sheet and push the lever downwards.
Raise the lever and move the machine to make another biscuit.
Bake the oven for approximately 12-15 minutes (or until the edges start to brown). You might have to rotate the pan to brown the cookies evenly.
Take the sheet out of the oven and let cool for about a minute before transferring the cookies onto the cooling rack.
Here's a video of me pressing the cookie out onto sheets. Sorry I am not a good video editor. No words here. But you will get the gist anyway...Pardon the mess, please. I was also making empanada at the time; hence, I had flour and bowls around.
At the time I got mine, it was the $41, chosen because of some good reviews on amazon. Then as of typing this, I saw the $14.39. I was intrigued by the cheap price. The gadget itself seemed the same. So I decided to order this just to see if it was made of the same material, and if constructed the same. Will update this post once I got a hold of the cheaper one.
I never saw my mother use hers. So I looked at some videos on how to use the cookie press. Got some ideas from Wilton's.
I used the ONLY recipe (coming up next) that came with the gadget, and while it said to grease the baking sheet, I found out that if I don't, the dough stays on the sheet after coming out of the press. If I did grease the baking sheet, the dough just would not stay on it. The Wilton video I saw suggested ungreased sheet anyway. I also had to shorten the baking time, and I placed the rack at the middle of the oven to not burn the cookies. After I developed the rhythm of pressing and baking, my husband is now a happy cookie muncher.
The baking pan I used is a nonstick insulated aluminum pan as pictured below in the link from amazon.
How to use the cookie press:
Unscrew the closing ring and raise the piston. Fill the entire cylinder with part of the dough prepared. Insert the desired die-plate into the closing ring.
The raised part of the die-plate must be facing downwards. Screw the closing ring onto the cylinder. Grrease a cookie sheet evenly. Choose the size of the biscuits you wish to obtain by rotating the regulator (1=small biscuits; 2=large biscuits).
Turn the knob so that the jack on the lever meets the notches on the rod. Pump the lever a few times until the dough comes out of the holes of the die-plate evenly. Remove this first dough so that the die-plate stays clean.Place the machine on the cold cookie sheet and push the lever downwards.
Raise the lever and move the machine to make another biscuit.
Bake the oven for approximately 12-15 minutes (or until the edges start to brown). You might have to rotate the pan to brown the cookies evenly.
Take the sheet out of the oven and let cool for about a minute before transferring the cookies onto the cooling rack.
Here's a video of me pressing the cookie out onto sheets. Sorry I am not a good video editor. No words here. But you will get the gist anyway...Pardon the mess, please. I was also making empanada at the time; hence, I had flour and bowls around.
Thursday, August 13, 2009
KNB: Icy Treats Snowcone and Slushie Maker
As I said in my halo-halo post, my older son suggested we order a snowcone maker. So I searched amazon.com for snowcone maker, slushie maker, and ice shaver, and found some that reminded me of those I saw in some stalls in the Philippines.
The Paragon brand was very expensive, and yet I knew that it produces crushed ice too
chunky for me to consider for halo-halo, just a bit finer than the crushed ice my fridge makes. So on to the next...
I seriously considered the New Hawaiian Ice Shaver, because not only was it familiar (I saw it in action in one of the vendors in the Philippines), I also knew that the ice shavings produced by it was perfect for halo-halo. But when I placed it in my cart, the shipping cost was prohibitive! It was so heavy that the
S&H would have been a whooping $45! So I scratched it off...
Next I considered something made in Japan (because they make excellent blades), but the plastic body (of the pink one) seemed so flimsy that it reminded me of my sister's ice shaver when she was still in the Philippines, which when cranked threatened to fall apart. The gray one looked like metal, but the make was not specified and I did not dare try.
So I just checked out those that had high reviews, and settled for Hamilton Icy Treats after reading the negative reviews versus the positive reviews.
My very own experience with it? It definitely faster than my mandolin slicer-made shaved ice, and the only negative thing I can say about it is I have to pause and rearrange the ice so they don't stick together and get stuck that way. Otherwise, the gadget is sturdy for the purpose, the shaved ice has two settings - slushie (coarser) and snowcone (finer). Sometimes I just switch from one to the other just to dislodge the stuck ice and keep it going. The on and off switch is the cover itself (which I think is an excellent precaution to avoid cuts in children). And it is compact enough that it does not occupy too much countertop space (unlike if I bought the New Hawaiian brand).
But if I lived in Hawaii, I would have settled for that...
Thursday, July 16, 2009
Char-Broil Grill

My favorite cooking gadget for this season....
After we ourselves installed our pool, we have been enjoying bumming under the sun when weather permits.
When hubby bought this, I was busy cleaning up the house. He went to home depot and sent me a picture message. I immediately went online and looked at the bad reviews of that product, called him about it, then he looked for the next cheap grill, still bad reviews. This one is the third cheapest, with mixed reviews so we went for it.
I have no real complaints so far...
Saturday, May 09, 2009
KNB: Sizzling Platter
Another purchase from my second foodbuzz earning.
I remember when I was in the Philippines, there was this sizzling steaks stall in SM City Foodcourt, and I just loved eating my hot salisbury steak off of that platter.
I thought it would be cool to re-live and experience that again, using these sizzling platters I got from amazon. I plan to use them on a bbq day, with the grill by the pool (as I envision it, since we are planning to have the pool built this May-June), let the steaks cook on these plates placed on a grill. The ribbed design makes it easy to pour off fat drippings (if desired). Each platter comes with its own holder.
Can't wait for summer!
Saturday, April 25, 2009
KNB: Nu-Wave Infrared Tabletop Oven
I saw this in a catalog, and I was intrigued. A portable oven where I can cook a whole chicken even straight from the freezer??? For less than $100??? While I essentially have no need for an additional oven since my conventional oven does a good job already, my curiosity got the better of me. This seemed like a very good idea for those who do not have the space in the kitchen for a conventional oven, or for those who simply cannot afford one. How about college students? it also claims to be able to bake muffins or rolls...that I gotta try.Anyway, I checked out the product reviews in amazon.com before I made this purchase. The first dish I made out of this is roasted cornish hen. While it took a while to bake, I realized I made a mistake of not cooking the back for half the time intially before turning it over to cook the breast part. But we ended up with very moist chicken which we loved.
Then I tried to cook steaks (marinated) in it, and they were tender and moist as well. My husband was very pleased with the results, and we were not sure whether it was the marinade that made the steaks moist though they were well done, or it was the oven itself.
The advantages are that I can cook frozen foods without having to pre-heat the oven, and end up with cooking time same as that using conventional oven minus the thawing time. Easy clean up as well (just like you would ordinary dishes). It does not heat up the kitchen as much as conventional oven does. The space it has for baking is just right for a family size meal (as long as I am not planning to bake other things like rolls or breads at the same time).
I did buy an extender ring (for additional $38++) so I could bake big chickens and small turkeys in it. The extender ring includes the transparent ring that makes the wall higher, and a rack that is 2 inches high, plus additional smaller nonstick baking pan.
While this is another clutter on my countertop, after I am done getting to know it, I will pass it on to my older son when he goes out of the house, living on his own, cooking for himself or with a friend. (Or I might love it all the more as time goes by!) I will still have to experiment baking yeast breads or muffins or cakes in it. If it really does as promised on ads, then I have got myself a winner at a bargain price.
This is what I got from my recent google ads and foodbuzz earnings. So my dear readers, if you have been enjoying my recipes here, paki-klik lang po ang mga gugel adverts for additional incentive for me to keep on posting. TY!
Thursday, April 02, 2009
KNB: Electric Gravy Boat/Warmer
I had been wanting this for a long time. Although I have a gravy boat that has nice prints, I wanted one like this, which will keep gravy warm during a meal.
This is not used to warm up gravy, but you will have to put warm gravy and this gadget keeps it warm. The warming base is also detachable from the cord, so that you can place it on the table during a meal and it will still keep the gravy warm for a period of time.
I am not sure if I can use other ceramic-type gravy boats on it, though.
What sucks, though, is I bought this a while back for >$30. I used the first month pay I got from foodbuzz (paid through paypal). Now that I am posting about it, the price is $19.40????
Bummer!
Saturday, March 28, 2009
Lemon-Pepper Grilled Salmon
Salmon has become my older son's favorite fish because "it's got real flavor unlike the haddock which does not taste anything at all to me."
I myself like salmon, especially when grilled. Actually, I almost always cook salmon this way, with only the basic of ingredients, then enjoyed with rice and some slices of ripe tomatoes sprinkled with salt.
I usually cook just half of the fillet (with intact skin), which will be all I and
my two sons can eat during a meal time (husband does not like salmon; too strong a flavor for him). Whereas before I cooked salmon on a iron griddle placed atop the stovetop, now I use the George Foreman grilling machine (small one, probably costs <$20 nowaadays). The cooking time is less since it cooks both sides at the same time (max 6 minutes depending on how thick the fillet is) and tends to close in the heat; clean up is easier; and I don't have to worry about flipping the fish over. To clean, I just let the machine cool down a bit, wipe it with non-abrasive slightly soapy dish sponge while still warm, then rinse with a bit of water, careful not to get water inside the machine (I hold it sideways).
Ingredients:
1/2 salmon fillet (actually amount depends on you)
Spices -- see slideshow so you know what I mean
garlic-salt
lemon-pepper
Instructions:
Sprinkle fillet with garlic salt, approximating how much you need for the amount of fish you have.
Generously sprinkle with lemon-pepper to really cover the whole surface. Let sit for about 5 minutes. Meanwhile, plug in the grilling machine.
When hot, spray or brush the grilling surface with oil.
Place the fillet on the grill and let cook for 4 to 6 minutes. (Fish is done when flaky all the way. Do not overcook!) For this piece, I had to turn around the fish after the first 4 minutes to cook the thin part further, as it was not touched by the upper grill. The closed-in heat further cooked that when turned around.
Thursday, March 05, 2009
Thanks to Mely for these Puto Molds!
I came home very tired from work today, and I still have to go to work early tomorrow morning, then I have the weekend off, and I will be able to update my blog and do some bloghopping.
Mely had told me about her sending these puto molds to me and I have been waiting excitingly for them.
I finally got them today! They were like mini muffin cups! But the good thing about these (in contrast to muffin cups) is that they do not have ridges, so clean up (and brushing with butter) will be much easier!
Thanks, Mely!!! Like you said, I will put these puto molds to good use...you can count on me for that!
Mely is a very good cook and has got lots of excellent recipes in her food blog.
For those who might be interested to purchase puto molds, the tartlet pans on the right will probably do (they are like shorter versions of muffin cups without the ridges).
Sunday, February 15, 2009
Amco Swing A-Way Grease Separator
src="http://pagead2.googlesyndication.com/pagead/show_ads.js">
For the past 5 years my cheap 1-cup fat separator had served me well enough. But many times I wish I had one with bigger capacity, with a wide mouth and stable base, such that pouring the sauce off from pan would not be too much of a hassle. So I browsed amazon.com again to look for one with good reviews. This particular brand and style caught my attention, not only because of its strainer that would get rid of big chunks of veggies and meat or bones left there and still retain some small bits that add flavor, but also of its bottom-release feature, which allows for minimal, if at all, inclusion of fat when you are pouring that gravy to saucepan. The cover of the tiny hole at the bottom is released with a squeeze of a silicone part at the handle.
However, despite buying myself this gadget for the purpose of separating fat from the sauce, I found an additional use for it. As a matter of fact, I used it first as a batter dispenser before I even had the chance to use it for fat separation when making gravy (which I haven't done to this day since I got this wonderful gadget). This photo shows the kutsinta batter being poured effortlessly and with minimal mess into individual muffin cups. I love it, and I just hope it lasts.
So even if it was more pricey than most fat separators, the two-in-one feature (which I did not foresee when I made the decision to buy it) makes it worth the price.
src="http://pagead2.googlesyndication.com/pagead/show_ads.js">
src="http://pagead2.googlesyndication.com/pagead/show_ads.js">
Wednesday, January 21, 2009
Food Processor
| From food processor |
While a lot of homemakers with a food processor usually end up stacking theirs in the basement, I already had plans with what to do with it, especially that I love cooking and canning. The set that I got can also prepare dough, and every reader of this blog knows how I enjoy baking. With the plans that I had, I had to get a specialty disc set, because what I really would want to be able to do with this food processor is the fine grating -- of yucca, mainly, since I love pichi-pichi and cassava cake. Of course, aside from the fine grating, I also had in mind faster and easier chopping/pureeing, and slicing when I am canning produce from my garden during fall. I actually chose the fine grater first then the main gadget
to go with it (as recommended by amazon.com). The only brand that has this fine grating disc was Cuisinart. Nothing else. However, when I got the pair, they were not really a pair. I got the wrong model. I should have gotten another model that had a stem which would attach to different discs. Good thing there was no problem shipping back the item and getting the refund. (I love amazon!)
Recently, with a recent Filipina gathering, my trip to the Asian store and getting green papaya to turn into atsara, I went on to "break in" my new food processor, grating two big yuccas in 1/4 the time it usually took for me to grate them manually (minus the achy arm and wrist!); grating the green papayas, and slicing the other veggies. It took me seconds to grate what I would have grated in an hour. Wow! I was impressed! And the receptacle was large enough to hold a whole onion! Cool! I am so looking forward to making more jars of pickles, jams and jellies next year.
I also made ube haleya two nights ago, using pre-grated ube that I was not sure whether it was pre-cooked or not. And while I was cooking it, I realized it was uncooked, and it was drying up already without being fully cooked yet. I decided to add more liquid and puree it using the food processor (I was not sure whether I could have achieved the same result with the blender; I probably could), before putting back to the stovetop to cook further. I have been eating some haleya since then (my sons have been enjoying it as well), but saving some for an experiment with ube cake. Those two will be on future posts...
Verdict: Met my expectations and more. Easy to clean as well. Seems durable (time will tell, but I am hoping to make full use of it). Quite pricey, but it seems worth it for freeing up some of my time and wrist/arm aches. If you are into canning or even catering, this is a great help. If you are not going to make any slicing or grating in big volumes, this is not recommended.
Now if only there is an electric stirrer powerful enough to stir cooking ube haleya, and long enough to reach the bottom of a stock pot while preparing pasta sauce, I'd be a much happier cook! Not that I don't like burning the calories, but I hate having a sore arm and wrist and right shoulder after such a tedious task.
Sunday, December 21, 2008
Rotisserie
This is my entry for this week's LaPiS theme: kitchen gadgets.
It was my husband's birthday gift for me...which I used yesterday for making lechon using ham (see pic below to judge for yourself how crispy it appeared.)
I saw this first at my friend Ana's house. She was making lechon manok with it using cornish hens (the small ones). It does a good job of basting the chickens with its own juice as it cooks.
I actually asked my husband for it. I wanted to see if I can make pork lechon crispy in it, while basting itself with its fat drippings as it rotates. Maybe the skin will turn out crispy if only fat will coat it, and not watery juice. Maybe it will stay soft. I plan to use only a small cut of probably shoulder ham with skin on. If it won't turn crispy I might just end up using the oven still.
We'll see...
UPDATE as of 12-21-08:
I used this rotisserie yesterday instead of using the oven for lechon. As usual, I boiled the ham in water and spices for 30 minutes (smaller cut than my previous), let the excess fluid drip. I used the rotisserie's spit rods to do this, placed in the rotisserie itself to drip on the pan, with door open. The surface was very dry the next day, so that crisping the skin was very good, better than deep frying like in lechon kawali yet, less
fat!!! However, I started cooking about 2.5 hours prior to serving time (because that was how I guessed it would take to get the skin crispy and the interior hot enough), but it was actually ready after an hour! The burnt look here was because I re-heated twice: one was 30 minutes before the planned serving time, and the other 30 minutes before the estimated arrival of our latest expected guest. Next time, I will know to start running this one hour before lunchtime (or supper time). The skin was super crispy!
Hubby liked the meat portion of this ham. (Note: "Ham" is pork part from hip area to knee; it does not necessarily mean cured. However, all the ham I have in my freezer is cured. In the same manner, they refer to pork belly as "bacon," whether sliced thinly or not, whether cured or not. I have requested to keep slabs of pork belly instead of turning them to bacon, but apparently they are so used to curing these, that I ended up with slabs of cured bacon...maybe it will be ok to use for lechon kawali, or I might roast in this rotisserie as well.)
| From rotisserie |
It was my husband's birthday gift for me...which I used yesterday for making lechon using ham (see pic below to judge for yourself how crispy it appeared.)
I saw this first at my friend Ana's house. She was making lechon manok with it using cornish hens (the small ones). It does a good job of basting the chickens with its own juice as it cooks.
I actually asked my husband for it. I wanted to see if I can make pork lechon crispy in it, while basting itself with its fat drippings as it rotates. Maybe the skin will turn out crispy if only fat will coat it, and not watery juice. Maybe it will stay soft. I plan to use only a small cut of probably shoulder ham with skin on. If it won't turn crispy I might just end up using the oven still.
We'll see...
UPDATE as of 12-21-08:
I used this rotisserie yesterday instead of using the oven for lechon. As usual, I boiled the ham in water and spices for 30 minutes (smaller cut than my previous), let the excess fluid drip. I used the rotisserie's spit rods to do this, placed in the rotisserie itself to drip on the pan, with door open. The surface was very dry the next day, so that crisping the skin was very good, better than deep frying like in lechon kawali yet, less
| From rotisserie |
Hubby liked the meat portion of this ham. (Note: "Ham" is pork part from hip area to knee; it does not necessarily mean cured. However, all the ham I have in my freezer is cured. In the same manner, they refer to pork belly as "bacon," whether sliced thinly or not, whether cured or not. I have requested to keep slabs of pork belly instead of turning them to bacon, but apparently they are so used to curing these, that I ended up with slabs of cured bacon...maybe it will be ok to use for lechon kawali, or I might roast in this rotisserie as well.)
Tuesday, November 11, 2008
FoodSaver
I spent the whole day yesterday packing a
whole year supply of chickens. My MIL raised them (we provided the money for buying the chicks and grains). We had a total of 32 which we brought to a slaughter house yesterday. As soon as I came home from my interview at another hospital, I spent the rest of my day packing. Packing itself was not tedious. I found it most tasking to clean the gizzards (made me wish i did not ask for those).Now I have fresh supply of chicken roasters. I cut up the smaller chickens for such meals as adobo or tinola (the whole ones I can also cut up later if I have to). I have chicken necks in groups of 6-8, perfect for arroz caldo. The gizzards and hearts I plan to cook adobo style, slow cooked. And of course, Adidas will have to be slow cooked as well...
Tips on freezing:
Freeze as soon as chickens are slaughtered. Make sure you have clean surfaces. I worked them in batches, keeping the rest of the chickens out in the garage where it was cold, and had my hubby throw ice cubes on them while I was still at the interview.
Use freezer grade paper or plastic. I used FoodSaver. I was quite surprised that my biggest chicken could fit in it, although I had some difficulty, but was successful with maneuvering. The less air in, the better. That's why I prefer vacuum packing. Prevents freezer burn.
Place in the freezer right away. Avoid fluctuations in temperatures. Especially avoid prolonging them inside where it is room temp; in that case, try to work quickly so you can place them in the freezer ASAP.
If bag improperly seals because of too much juices from the meat, try to freeze first for 3 hours while in the freezer bag (to solidify the juices) before sealing.
| From Food Saver |
| Freezer full of frozen goods |
Tips on freezing:
Freeze as soon as chickens are slaughtered. Make sure you have clean surfaces. I worked them in batches, keeping the rest of the chickens out in the garage where it was cold, and had my hubby throw ice cubes on them while I was still at the interview.
Use freezer grade paper or plastic. I used FoodSaver. I was quite surprised that my biggest chicken could fit in it, although I had some difficulty, but was successful with maneuvering. The less air in, the better. That's why I prefer vacuum packing. Prevents freezer burn.
Place in the freezer right away. Avoid fluctuations in temperatures. Especially avoid prolonging them inside where it is room temp; in that case, try to work quickly so you can place them in the freezer ASAP.
If bag improperly seals because of too much juices from the meat, try to freeze first for 3 hours while in the freezer bag (to solidify the juices) before sealing.
Sunday, September 28, 2008
Antique Home Tools and Gadgets
We went to a tractor show sometime last year, and this exhibit was the least I was expecting, yet it was the highlight of my day...
Do you want to have an idea of how kitchen, laundry and food processing tools and gadgets looked like in the past? Watch this slideshow...
Do you want to have an idea of how kitchen, laundry and food processing tools and gadgets looked like in the past? Watch this slideshow...
Subscribe to:
Posts (Atom)
Custom Search
